Comments on: Reason CV to Roland DIN Sync http://www.peff.com/journal/2009/07/20/reason-cv-to-roland-din-sync/ Music and Audio Technology - Propellerhead Software Record, Reason, ReBirth RB-338, Record - Reason Tutorials, Power Tools for Reason, ReFills, and other electronic music coolness Thu, 23 May 2013 19:55:09 +0000 http://wordpress.org/?v=1.5.2 Comment on Reason CV to Roland DIN Sync by: peff http://www.peff.com/journal/2009/07/20/reason-cv-to-roland-din-sync/#comment-74860 Thu, 08 Mar 2012 16:55:53 +0000 http://www.peff.com/journal/2009/07/20/reason-cv-to-roland-din-sync/#comment-74860 i haven't looked at the inner clock devices in awhile. It looks like they've developed a sync box that runs off of AC audio pulses... this could potentially work however i would need to see the specs to be certain: http://www.innerclocksystems.com/New%20ICS%20Sync-Gen%20II%20Pro.html i haven’t looked at the inner clock devices in awhile. It looks like they’ve developed a sync box that runs off of AC audio pulses… this could potentially work however i would need to see the specs to be certain:

http://www.innerclocksystems.com/New%20ICS%20Sync-Gen%20II%20Pro.html

]]> Comment on Reason CV to Roland DIN Sync by: peff http://www.peff.com/journal/2009/07/20/reason-cv-to-roland-din-sync/#comment-74836 Thu, 08 Mar 2012 04:54:17 +0000 http://www.peff.com/journal/2009/07/20/reason-cv-to-roland-din-sync/#comment-74836 have you checked out some of the projects at http://muffwiggler.com From an end user perspective, I think the MOTU/Volta solution is one of the easiest because it doesn't rely on a lot of low level customization. Motu is pretty good at keeping their drivers up to date, and you can even use an 828 (i think) which runs less than 100 USD on ebay. If you're using ableton, then there are a few other nice arduino based alternatives, but with Reason this is probably the best solution for controlling external hardware. I've looked at the Xmos prototyping boards but these run about $150 for the two channel version. It seems viable to remove the lowpass filter circuit and use the high precision dacs control analog modular gear. have you checked out some of the projects at http://muffwiggler.com

From an end user perspective, I think the MOTU/Volta solution is one of the easiest because it doesn’t rely on a lot of low level customization. Motu is pretty good at keeping their drivers up to date, and you can even use an 828 (i think) which runs less than 100 USD on ebay.

If you’re using ableton, then there are a few other nice arduino based alternatives, but with Reason this is probably the best solution for controlling external hardware. I’ve looked at the Xmos prototyping boards but these run about $150 for the two channel version. It seems viable to remove the lowpass filter circuit and use the high precision dacs control analog modular gear.

]]> Comment on Reason CV to Roland DIN Sync by: IngoTB303 http://www.peff.com/journal/2009/07/20/reason-cv-to-roland-din-sync/#comment-74814 Wed, 07 Mar 2012 06:28:07 +0000 http://www.peff.com/journal/2009/07/20/reason-cv-to-roland-din-sync/#comment-74814 Sorry I forgot the link to the first article ;) http://www.adambaby.com/studiotech_sync.html Sorry I forgot the link to the first article ;)

http://www.adambaby.com/studiotech_sync.html

]]> Comment on Reason CV to Roland DIN Sync by: IngoTB303 http://www.peff.com/journal/2009/07/20/reason-cv-to-roland-din-sync/#comment-74813 Wed, 07 Mar 2012 06:24:11 +0000 http://www.peff.com/journal/2009/07/20/reason-cv-to-roland-din-sync/#comment-74813 Another blog: http://www.rv0.be/sudc.html (another tool to generate pulses) -> but you always need special hardware! ;-) Another blog: http://www.rv0.be/sudc.html (another tool to generate pulses) -> but you always need special hardware! ;-)

]]> Comment on Reason CV to Roland DIN Sync by: IngoTB303 http://www.peff.com/journal/2009/07/20/reason-cv-to-roland-din-sync/#comment-74812 Wed, 07 Mar 2012 06:11:13 +0000 http://www.peff.com/journal/2009/07/20/reason-cv-to-roland-din-sync/#comment-74812 Hello, beside this article I found another nice article about that topic. It is interesting, too. Maybe the box from innerclock systems I could use your reason-sync file without MOTU Volta or similar technology. Kind regards, Ingo Hello,

beside this article I found another nice article about that topic. It is interesting, too. Maybe the box from innerclock systems I could use your reason-sync file without MOTU Volta or similar technology.

Kind regards,

Ingo

]]>